Epoxi Filler
Use
Epoxi Filler is specially designed for repairing damaged gelcoat and keels of iron/steel/lead. It is suitable for use both above and below the waterline. Can be applied up to 2 cm thick without shrinking. Epoxi Filler is easy to work with on both vertical and horizontal areas.
Mixture
1 part hardener to 2 parts base, mix thoroughly. Potlife at + 5 ° C = 70 min, 15 ° C = 45 min, 25 ° C = 15min
Application
Blast or abrade the surface rough, remove dust and apply Epoxi Filler to a clean, dry and grease-free surface. Iron/steel/lead surfaces must first be treated with Epoxi Primer. We recommend using protective gloves.
+5°C
+15°C
+25°C
24h
16h
6h
24h
16h
6h
Launching
72h
48h
24h